No need to login to a pre-configured DHCP server – USB Network Gate (former USB to Ethernet Connector) simply assign a dynamic IP address to any desktop, select a subnet to start binding, and use that IP address as the host for your USB device.
USB Network Gate does not affect OS driver installation – it is validated for compatibility for your specific operating system. As a result, you can install and use USB devices without fear of conflicts with your existing or legacy drivers.
USB devices work with any virtualization platform - including VMware, Hyper-V, Microsoft Server Virtualization and virtual machine software such as VMware Workstation/Player/ESX, ESX/ESXi, Microsoft Virtual Server, etc.
Install USB Network Gate in offices, other locations with VPN, WAN, or LAN connectivity, or on blade or other server virtualization platforms. As seen in the screen-shots, you can use USB Network Gate in all phases of your virtualization platform deployment without any special considerations.
Internet Gateway ports are assigned to virtual hosts by USB Network Gate while VM adapters are assigned to ESX or Hyper-V servers by NetApp. The VLAN interfaces of ESX are attached to the ESX servers by the USB Network Gate allowing them to emulate a physical network system.
USB Network Gate is the ideal choice if you need to share a USB device in the office. Rather than changing existing network configurations, you can simply share an USB printer, scanner or other device on a single PC and then it can be accessed wirelessly from other desktops or laptops in the office. 7211a4ac4a